Wednesday, November 16, 2016

East Coast IPA Brew Day... and Vertical Tasting of Boulevard Rye on Rye.

The team gathering in the
garage with Bailey the
"lab-brew-doodle"
On Saturday morning the team gathered for an epic brew day.   We were determined to brew our version of an East Coast IPA.   10 gallons of hoppy deliciousness.   The recipe was set out in the previous post.  Basically a whole lot of Mosaic, Citra, and Cascade, with a touch of Warrior, and Simcoe, to add some bitterness on the front and in the middle.

Beth and Mashy Hoppinton
visited during brew day.  What
a cool mom, notice the beer.
This was a fairly medium gravity brew, only 22.5 lbs of grain.   The base grain was Vienna 20 lbs, and the only other additions are  2.5 lbs of wheat malt, and 1 cup of white flour (to make it murky).  The flour is the wild card,  we have never done that before.  We have never tried to make a beer cloudy before.   It was a real weird feeling, adding something to the mash for the express purpose of making a beer appear cloudy.  All of our grains came from Cargill.   The Vienna from Cargill is amazing stuff.  Malty and bready... gives an awesome back bone for a hoppy beer.  Meussdoerffer Vienna... We have made ECIPAs in the past with pale ale, or two row malt, and they were delicious, but the Vienna adds something that can stand up to all those hops.    

22 lbs of crushed grains about
to go into a 100 quart no sparge
mash tun. 
We crushed the grains fine  (35 mils) the day before at a friends who has a seriously big mill.   Like the kind you see at a home brew shop... But like an idiot, I left the grains in the car overnight, so they were at 51 F as we started the brew day.   We know from experience that when we brew no sparge in our cooler we loose about 7 F.   Even if we pre heat the mash tun.  So our software suggested we should be at 160 F Strike, so we added our grains first and then added 165 F water.    John had treated the water with Camden,  Lactic (2ml) and Calcium Chloride 2 g.   Our pH settled in nicely at 5.2, at temperature, so it was probably closer to 5.4 or 5.5... which is fine with us.

Brew in a bag in a mash tun
our favorite way to brew.
We know that 5 F to 6 F over
strike temperature will hit
our strike temp every time. This
cooler has a door in the lid, so
we can stir during the mash.
The mash went well.  We stirred every 15 minutes.   Our mash tun has a door on the top of the lid that we can open with out losing too much heat.  Our mash temps remained perfect at 149 to 152 F for the entire 60 minutes of the mash.   And we ended up overshooting by .004... which means we got 77% efficiency on a no sparge, brew in a bag, in a cooler... pretty darn cool.  This is by far the easiest and fastest way to brew.  Even with our complex boil schedule.  We were done brewing in 3.5 hours.   Although the brew day was much longer, due to bottling 20 gallons of beer, and the vertical tasting.

East coast IPAs are fun to brew, and relatively easy.  The boil went as planned due in no small part to organization of the ingredients, and preparation.   Jake got the group more disposable plastic cups for measuring hop additions.  The cups were labeled  and set out in order.  There was well over a pound of hops going into this 10 gallon hop monster.

Jaded hydra is the king of
all worth chillers.. pay heed
and homage!
The fun thing about the ECIPA style is so many of the hops go in at the end of the boil, and there are hop additions during the wort chill.  We made our flame out additions and then we used our trusty Jaded Hydra to chill the batch to 180 F.  At 180 F we added more hops and let them whirl pool for 30 minutes.  Then we chilled the batch to pitching temperatures.  The jaded hydra makes chilling the entire batch lightning fast.  It chilled from 212 F to  179 F in under a minute.  Of course cool ground water temperatures helped a lot.

10.5 gallons in the
chamber turning in to awesome
ECIPA.
Early in the day, John re hydrated three packs of US05.  They were ready to rock and roll when we pitched.   As of today (Tuesday) Both batches are fermenting well in the fermentation chamber at 65 F.  Tonight Jake and John will add 1 ounce of Mosaic, Citra, and Cascade to the fermenters.   In a couple of days the batch fermentation temperature will be raised to 68 F to encourage complete fermentation, then in a week another charge of dry hops.   The second dose of dry hops will only be exposed to the beer for 3 or 4 days.   Then it will be time for packaging.   We package beer when it is ready.  Well how do you know it is ready.   It is really simple,  take a gravity sample.   Take a sample and when it is at terminal gravity let it sit a couple of days to clean up.  That is all it takes.

We should be drinking this beer in about 2.5 to 3 weeks.   Can't wait.  This one should be great.

At the end of the brew day, after all clean up, we gathered in the house for a vertical tasting of Boulevard Rye on Rye.   2012 through 2016.    If you are not familiar with Boulevard's smoke stack series... Smoke Stack brews from boulevard are made on their smaller original brewing system.  And they are world class.   This is where Boulevard makes their limited release beers.  This is where Boulevard brewers are encouraged to experiment.   This is where Tank 7, and Lovechild, and Tell Tale Tart were born.  And Boulevard Rye on Rye is an outstanding beer.  It is a Rye Beer, aged in Rye Barrels.

We all had different impressions.   My favorite was the 2015.  It still had some of the Spicy Rye character.   I think everyone else preferred the 2014 version.   Love this beer, and I am thankful that my brewing partners can store and save beer.  I don't seem to have that discipline.   If you have never tried it, stop what you are doing and go get some.

8 comments:

  1. how did it taste? Hope all is well. Been a while since your last post.

    ReplyDelete
  2. Yeah, the holidays have been crazy for all of us. We have still been brewing, but our brewsessions were just for us over the holidays. The ECIPA was great, a really well made beer, but next time I'm adding even more whirlpool hops. We got it sweet and juicy, but not over the top like we wanted. So if you make it, I would suggest halfing again our whirlpool additions, and or doubling them. Stay tuned the Malt series is about to begin.

    ReplyDelete
  3. Far be it from me to put pressure on you guys with busy lives, but I was curious if you had intentions of resuming your somewhat regular posts in the near future? You guys have been one of my favorite blogs to follow, so I hate to see you go away, but will keep the blog as a resource when needed or to refer to new brewers rather than a site I go to every couple days hoping for a new post...

    ReplyDelete
    Replies
    1. Im back on it. Sorry we were so busy. A promotion for two of us and babies for the other two... we just needed to chill out. But You will find we are back at it again.

      Delete
  4. It would be great to read more concerning that blog..!Thank you for posting this blog.
    gclub
    โกลเด้นสล็อต
    gclub

    ReplyDelete
  5. Roblox gift card code generator is a free online tool that generates $5, $10, $40 Roblox card codes. These codes are like the original codes. We also say that it is a treasure of Roblox gift card codes. If you want to more information about Roblox Gift Card Pin Generator so visit our blog.

    ReplyDelete
  6. It's good to be here and read some interesting posts , i got very useful information over here thanks for sharing it. Autoclicker

    ReplyDelete